Page 163 of 182

The Next Consortium of ITRI launches ‘RoboScooter’

Sunday, May 11, 2008

At the Pavilion of Taiwan Automotive Research Consortium during the AutoTronics Taipei 2008, in Taipei Time, the Next Consortium of Industrial Technology Research Institute (ITRI) unveiled a brand-new environmental-concept vehicle named “RoboScooter”. It was jointly designed by the Creativity Lab of ITRI, SYM Motors, and the Media Lab of Massachusetts Institute of Technology. This announcement was approved by industrial, governmental, and academical executives, but not just in Taiwan.

The ability for R&D to manufacture the electronic vehicles and bicycles was concerning to several automobile-related industries. There was concern not only from several trade shows, but also international competitions related to the design after winning several prizes back in Taiwan to establish the industrial position and brand image of “Made in Taiwan”. Since several industries like automobile are transformed to high-value industries, “creativity” progressively became a key element before unveiling any new products.

As of this sector, Wen-jean Hsueh (ITRI Creativity Lab General Director) hoped companies could do proper transformations on its R&D nature from “Made in Taiwan” to “Created in Taiwan” for best practice. This not only echoed “OBM” theory discussed at 2007 Taiwan Brands’ Trend Forum but also blended with a key element of production – “creativity”.

On the other side of SYM Motors, to solve the transportation problem for TWTC Nangang, SYM Motors Taiwan imported manufacturing technology from Kinglong Bus Co., Ltd. to manufacture several 4th-cycle low floor buses and sell them to Chung-hsing Bus Co., Ltd. and Kwang-huang Bus Co., Ltd. In this launch, the SYM Motors Taiwan hope this vehicle is energy-efficiency, easily-parked, and has creative functions which can improve the transportation habits of individuals.

The Essence Of Real Friendship}

Submitted by: William U. Steinmetz

It is very rare to meet a person without having a single friend because friendship is a fundamental relationship in our daily lives. We encounter so many people each day, get to know each other and share common interest. Some friends last long and being cherished for a lifetime. Real friendship is very comforting but friends should be chosen carefully.

Many believe that friendship is a form of blessing coming from God. It is a mutual and non judgmental relationship of two or more unique and diverse personalities who share common goals and interests in life. For some, they treat friendship as a strong tie between individuals who are willing to give, listen, understand and do not demand. Each of us has the freedom to select our friends. There might be several definitions for friendship but the essence of real friendship stays the same. Trust is the primary source of the relationship. Without trust, nothing can be established. You will only start building a friendly relationship with someone if you learn how to believe. With that, sharing about life follows. There are times that you cannot tell anything to your family and relatives about a specific matter, but because of trust and bond that you have with your friend, you are willing to open up to him or her. The foundation of a real and long lasting friendship is faith and undying love which can render care and support no matter what the situations are.

[youtube]http://www.youtube.com/watch?v=9_cKcWiweMA[/youtube]

Like a beautiful flower, friendship must also be nurtured with love and care. The relationship should maintain its warmness and glow despite the hard times or the not so good times being spent together because real friendship is kind and true. As pretty as a flower, friendship blooms whenever it has been taken good care by someone with a pure and compassionate heart. The world may turn against you but a true friend will always believe and care for you.

Having good friends is good for the soul. Friendship increases your sociability and later on, you will feel happy, comfortable and secured being with your friends. When you are down, friends are there to lift you up. When you are sad and mourning, friends stay beside you and will bring smile into your face. It is a wonderful feeling to have real friends. Everyday living is a challenge, full of trials and problems. But if you have someone to lean on, everything goes easy and possible to make through. There are so many relationships in the world but only friendship can endure and survive most of the time. Real friend can join you conquer the world. The essence of true friendship is experienced by a person who was able to find a true friend in his journey in life. Money cant buy you a real friend. The bond in friendship that you have is worthwhile. The joy being felt during fun times with a friend can never be replaced by any material thing in this world because friendship is a priceless treasure.

About the Author: William G. Steinmetz enjoys writing for Targettossgames.com which sells

bean bag games

and

washers game

as well as a host of additional products.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=611361&ca=Relationships }

Latest trial of the One Laptop Per Child running in India; Uruguay orders 100,000 machines

Thursday, November 8, 2007

India is the latest of the countries where the One Laptop Per Child (OLPC) experiment has started. Children from the village of Khairat were given the opportunity to learn how to use the XO laptop. During the last year XO was distributed to children from Arahuay in Peru, Ban Samkha in Thailand, Cardal in Uruguay and Galadima in Nigeria. The OLPC team are, in their reports on the startup of the trials, delighted with how the laptop has improved access to information and ability to carry out educational activities. Thailand’s The Nation has praised the project, describing the children as “enthusiastic” and keen to attend school with their laptops.

Recent good news for the project sees Uruguay having ordered 100,000 of the machines which are to be given to children aged six to twelve. Should all go according to plan a further 300,000 machines will be purchased by 2009 to give one to every child in the country. As the first to order, Uruguay chose the OLPC XO laptop over its rival from Intel, the Classmate PC. In parallel with the delivery of the laptops network connectivity will be provided to schools involved in the project.

The remainder of this article is based on Carla G. Munroy’s Khairat Chronicle, which is available from the OLPC Wiki. Additional sources are listed at the end.

Contents

  • 1 India team
  • 2 Khairat
    • 2.1 The town school
  • 3 The workplace
  • 4 Marathi
  • 5 The teacher
  • 6 Older children, teenagers, and villagers
  • 7 The students
  • 8 Teacher session
  • 9 Parents’ meetings
  • 10 Grounding the server
  • 11 Every child at school
  • 12 Sources
  • 13 External links

Victoria Wyndham on Another World and another life

Thursday, December 13, 2007

Victoria Wyndham was one of the most seasoned and accomplished actresses in daytime soap opera television. She played Rachel Cory, the maven of Another World‘s fictional town, Bay City, from 1972 to 1999 when the show went off the air. Wyndham talks about how she was seen as the anchor of a show, and the political infighting to keep it on the air as NBC wanted to wrest control of the long-running soap from Procter & Gamble. Wyndham fought to keep it on the air, but eventually succumbed to the inevitable. She discusses life on the soap opera, and the seven years she spent wandering “in the woods” of Los Angeles seeking direction, now divorced from a character who had come to define her professional career. Happy, healthy and with a family she is proud of, Wyndham has found life after the death of Another World in painting and animals. Below is David Shankbone’s interview with the soap diva.

Contents

  • 1 Career and motherhood
  • 2 The politics behind the demise of Another World
  • 3 Wyndham’s efforts to save Another World
  • 4 The future of soap operas
  • 5 Wyndham’s career and making it as a creative
  • 6 Television’s lust for youth
  • 7 Her relationship today to the character Rachel Cory
  • 8 Wyndham on a higher power and the creative process
  • 9 After AW: Wyndham lost in California
  • 10 Wyndham discovers painting
  • 11 Wyndham on the state of the world
  • 12 Source

Vein Removal At Laser Advantage}

Vein Removal at Laser Advantage

by

lancelocallisting

The CoolGlide Xeo laser combines the ideal laser wavelength with the most flexible parameters to deliver a superior vascular laser system. It treats a broad range of vessels from tiny spider veins to deep blue reticular veins quickly, safely, and effectively. Patients with dark, light or tanned skin can experience outstanding results with minimal bruising or blistering. Often, patients find that one or two treatments are sufficient.

The CoolGlide system delivers pulses of light energy which causes the blood within the vein to coagulate, eventually destroying the vessel which is later reabsorbed by your body. Most patients experience a stinging sensation as the pulses of energy are delivered through the handpiece.

Blood blisters or hemangiomas respond very well to CoolGlide Vein Therapy. Patients with port wine stains and other vascular lesions have been overwhelmed by the success of their CoolGlide vascular treatments.

Vein RemovalFollowing your treatment, some redness or bruising may occur. When larger veins are treated, a tan or brownish pigment may persist for a few weeks or months following treatment.

[youtube]http://www.youtube.com/watch?v=ifEV3zmRYBs[/youtube]

Patients generally resume most normal activities immediately. The use of sunscreen is recommended on any treated areas exposed to the sun. Most patients find that the majority of the treated veins have shown significant improvement within two to six weeks of treatment.

The CoolGlide Xeo laser combines the ideal laser wavelength with the most flexible parameters to deliver a superior vascular laser system. It treats a broad range of vessels from tiny spider veins to deep blue reticular veins quickly, safely, and effectively. Patients with dark, light or tanned skin can experience outstanding results with minimal bruising or blistering. Often, patients find that one or two treatments are sufficient.

The CoolGlide system delivers pulses of light energy which causes the blood within the vein to coagulate, eventually destroying the vessel which is later reabsorbed by your body. Most patients experience a stinging sensation as the pulses of energy are delivered through the handpiece.

Blood blisters or hemangiomas respond very well to CoolGlide Vein Therapy. Patients with port wine stains and other vascular lesions have been overwhelmed by the success of their CoolGlide vascular treatments.

Vein RemovalFollowing your treatment, some redness or bruising may occur. When larger veins are treated, a tan or brownish pigment may persist for a few weeks or months following treatment.

Patients generally resume most normal activities immediately. The use of sunscreen is recommended on any treated areas exposed to the sun. Most patients find that the majority of the treated veins have shown significant improvement within two to six weeks of treatment.

The CoolGlide Xeo laser combines the ideal laser wavelength with the most flexible parameters to deliver a superior vascular laser system. It treats a broad range of vessels from tiny spider veins to deep blue reticular veins quickly, safely, and effectively. Patients with dark, light or tanned skin can experience outstanding results with minimal bruising or blistering. Often, patients find that one or two treatments are sufficient.

The CoolGlide system delivers pulses of light energy which causes the blood within the vein to coagulate, eventually destroying the vessel which is later reabsorbed by your body. Most patients experience a stinging sensation as the pulses of energy are delivered through the handpiece.

Blood blisters or hemangiomas respond very well to CoolGlide Vein Therapy. Patients with port wine stains and other vascular lesions have been overwhelmed by the success of their CoolGlide vascular treatments.

Vein RemovalFollowing your treatment, some redness or bruising may occur. When larger veins are treated, a tan or brownish pigment may persist for a few weeks or months following treatment.

Patients generally resume most normal activities immediately. The use of sunscreen is recommended on any treated areas exposed to the sun. Most patients find that the majority of the treated veins have shown significant improvement within two to six weeks of treatment.

If you are tired of shaving, or have unwanted facial and body hair, you can now safely remove it with our new Cutera CoolGlide Xeo Laser. For info about

Concord Laser Hair Removal

visit laseradvantageofec.com

Article Source:

eArticlesOnline.com }

Amnesty report’s criticisms rejected by Bush administration

Sunday, June 5, 2005

Irene Khan, Secretary General of Amnesty International, compared the United States detention facility at Guantanamo Bay to a Soviet-era gulag in that it is “entrenching the practice of arbitrary and indefinite detention in violation of international law,” she said.

The group’s Executive Director William Schulz, on Fox News Sunday, said in response to questioning that they do not “know for sure” whether or not testimonies it has published describing torture and abuse of prisoners by sections of the U.S. military are valid because the U.S. will not give access to the camp to investigate them. [1]

He also said he has no conclusive evidence that U.S. Secretary of Defense, Donald Rumsfeld, ordered torture of detainees at the facility. Schulz had previously referred to “apparent high-level architects of torture,”, and included Donald Rumsfeld in that group. [2]

Director Schulz stated that comparing the installation to a gulag was perhaps not the best choice of words. “…they (detainees) are not in forced labor, they are not being denied food. But,” he continued,” there are some analogies between the gulags and our detention facilities.” Schulz alleged that U.S. officials are “running an archipelago of detention facilities,” some secret. The report also describes “ghost” detainees who “disappear” and the export of prisoners to countries that are known to practice torture.

During his appearance, Schulz argued that his and other human rights groups should be given broader access to the facility. “We don’t know for sure what all is happening at Guantanamo,” he said, “and our whole point is that the United States ought to allow independent human rights organizations to investigate.” The treatment of prisoners at the facility has been in hot dispute recently, with Amnesty International comparing the facility to a “gulag” in its annual human rights report. Bush administration officials condemned the comparison.

On Friday, the U.S. government released documents indicating that both guards and detainees at the facility had on a few occasions abused the Qur’an, the Muslim holy book.

Prisoners and ex-prisoners at Guantanamo Bay have testified that they have been tortured. David Hicks, still being held, filed an affidavit on August 5, 2004 [3] declaring that he had been tortured, abused and ill-treated during his detention by US military authorities, and that he saw and heard similar treatment inflicted on other detainees. Mamdouh Habib, now free, says about his time at Guantanamo Bay that he was told by interrogators that his family had been killed, and that he was tied to the ground while a prostitute menstruated on him. Professor Christopher Tennant of Sydney University also stated he saw an unsigned medical report from Guantanamo Bay that backed up Habib’s claim to have been beaten while in US custody;

“Well, the main feature of the medical report from Guantanamo was that he had had repeatedly blood in his urine, which is a very significant symptom and a worrying symptom, and that was consistent with his reports both to me and to the specialist physician who also examined him, and was consistent with the fact that, on examination, he had evidence of discolouration to his skin on his right loin, just over his kidney, which in turn was consistent with old bruising and possibly due to being beaten.”

Runaway EMU train collides with freight train in India

Friday, May 1, 2009

At approximately 06:00 a.m. (00:30 GMT) Wednesday, between four and seven people were killed when an Electric Multiple Unit (EMU) passenger train crashed into a stationary freight train at Vyasarpadi Jeeva station, in Chennai, India. Between eleven and twenty persons were injured, and rushed to General Hospital in Chennai.

Officials are unsure of the number of persons aboard the passenger train, which was operated by an unknown person. “It is not clear who operated (it),” said S. Jayanth, acting general manager of Southern Railway. The operator of the EMU train was not in the train when it left 15 minutes to half an hour before the scheduled departure time. It is said some passengers did board the passenger train.

The EMU train ignored all signals, and drove about 7 kilometers (4 mi) at high speed, jumping tracks, before colliding with the goods train.

The driver of the goods train, Arumugam, has been confirmed as one of those who has died. The goods train was traveling between Arakkonam to Chennai. The motorman, guard and assistant jumped from the goods train sustaining fractures.

“We heard a loud noise and saw several compartments in flames. The smell emanating from bodies from the mangled coaches was nauseating,” said M.N. Selvi, a nearby resident.

The platforms at the Vyasarpadi Jeeva station were destroyed, and electrical cables were torn down. The EMU train caught fire in the collision destroying two compartments completely. The other compartments were thrown from the tracks. The freight train was loaded with oil tanks, however reports indicate that only the EMU train was set ablaze.

All train services were canceled for a time on one of the busiest rail lines of India. “Train services are disrupted due to the mishap but we hope to restore the services in two to three hours time,” an Indian Railways spokesperson.

Railways Minister Lalu Prasad announced that an inquiry will be held.

Specific Categorization Of Law}

Specific categorization of law

by

Sarah Jose

In addition to the basic classification of law, which includes the domestic and international laws; the public and the private laws there are specific classifications of law which help us to have a better understanding on the insights of law.

Admiralty law is commonly known as the Maritime law. The admiralty law deals with the regulations that cater to the issues that are connected with the imports and export through the mode of water, further this regulation not only deals with the imports and exports through water transport but it also includes regulations on all the aspects connected with water transport. The maritime laws are almost framed by all the countries. The attorney general manages all the issues which are concerned with the cargo disputes, oil pollution, fishing, regulations, international trade and even the injuries that take place on the docks and the vessels. The attorneys general have expertise knowledge on the issues like the trade law, legal matters which are associated with the environmental protection aspects and the protection of the endangered species. This law also covers on the issues which are involved with the freight disputes and the passenger liabilities.

[youtube]http://www.youtube.com/watch?v=1MtMm2f-IEY[/youtube]

The laws which have been framed to enhance the safety concerns via air transport are referred as aviation laws. The aviation laws also cover the different regulations concerning the aircraft operations and the maintenance of the aircraft facilities.

In US there are specialized courts that govern the matters which are concerning the issues of bankruptcy rulings. The attorneys handle these cases of bankruptcy.

There are a number of civil laws that are concerned with aspects that consider the rights and the privileges of the citizens. The rights which are guaranteed by the Constitution of the country are the freedom of independency, freedom to vote, freedom of speech, freedom of expression, freedom of assembly and above all the right to be treated equitably by all.

These days the world is being flooded with the new products; people are intended to advertise more so as to become more competitive so it is quite obvious that there would be tall claims. However it is important to remember that the tall claims or the claims which are not true needn’t be advertised whatever the reason may be hence for the protection of the consumer there are a number of laws enacted so as to protect the consumers against the false and fake claims, such enactments are referred as consumer rights.

Business activities having achieved greater heights, it is essential that there are a set of well laid laws that can solve the complexities of the business, the corporate laws concern on all the issues relating right from the formation to the dissolution of the firms.

The criminal laws are brought in force for the crimes ranging from the petty offences to the murders, there are stringent rules formulated so as to contemplate on matters which have to be dealt seriously. The criminal laws are laid down by the local, state and the federal governments.

Further there is another broad classification of employment law which exercises on the matters covering the employee and employer relations.

Sarah Jose is a Copywriter of BensonCoLaw.She has written many articles in various topics related to

Kelowna lawyers,Lawyers kelowna

.For more information on

Penticton lawyers

and any other Legal Needs visit

lawyers Penticton

Article Source:

eArticlesOnline.com

}

Anyone Can Become A Jewellery Maker

Submitted by: Adam Hunter

Buying jewellery from a retailer can be expensive and also it may be difficult to find the exact piece that you want.

The easy way to solve this problem and save you some money is by making your own jewellery that you will love, creating the exact style, shape and cut that you want.

As well as saving you money, it can also be a great way to tap into your creative side and could be a great way to take the stress out of present buying as creating jewellery for friends and family couldn t be easier. If you are feeling especially adventurous, designing your own jewellery could be a great way to earn some extra cash, or to start a fully operational business of your own.

The first thing that you will need is your materials to make sure you are prepared. To make beaded jewellery you will need the following; beads, 2 tubular-shaped or circular crimp beds, spring ring clasp, wire or cord for threading the beads, scissors or wire cutters, tweezers and a bead board. If you haven t got a bead board then you can use any work space that is free from clutter.

[youtube]http://www.youtube.com/watch?v=AZ0Cif1W_cM[/youtube]

You can purchase all the above from any good jewellery making supplies shop, probably the best place is online. You will need all of the equipment to ensure your jewellery is the best quality can be.

The next thing to do is decide on a design, choose something simple if you are a beginner then as you get more confident go for something a bit more creative.

Next thing to do is place your beads on the bead board in the desired length then align the cord alongside it, leaving 2-3 inches of wire or cord extra at each end.

Once you have done this, attach the crimp beads to the wire or cord by taking one end of the cord and passing it through one crimp bead. Then take the same end of the cord and pass it through the crimp bead to create a small loop that the clasp will hook onto later.

Then, place the crimp bead in one of the oval-shaped slots of the crimping piles and compress the pliers firmly. Now turn the crimp bead over on its side and place it in the other slot of the crimp pliers (the one closest to its nose). Once again, compress the handles of the pliers firmly so that the crimp bead will assume a rounded shape.

Flush cut the extra wire or cord to the crimp bead, or keep a little extra length to thread a few beads to hide the exposed wire or cord.

That s the hardest part over, to make your jewellery take shape, thread the beads from the other end of the cord then attach the spring clasp buy inserting the end of the cord.

You are nearly done, finally either cut the end of the cord or hide it using a few beads.

So there you have a beautiful new piece of jewellery that has cost you a lot less than what you would buy in the shops.

About the Author: Adam Hunter – E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of

jewellery making supplies

from over 10,000 products including gold and silver wire, jewellery findings, tools, precious metal clay and precious metal sheet – gold, silver, platinum and palladium plus technical information for jewellers, jobbers, designer, craftsmen, artisans and students.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=634780&ca=Arts+and+Crafts

NASCAR: Greg Biffle wins 2010 Price Chopper 400

Monday, October 4, 2010

Roush Fenway Racing driver Greg Biffle, who qualified fifth, won the NASCAR Sprint Cup Series 2010 Price Chopper 400 held on October 3, 2010 at Kansas Speedway in Kansas City, Kansas, United States. This became his second win of the season.

Biffle was chased by Jimmie Johnson up to the finish line, but was not able to catch him this weekend. Following the race, Johnson became the points leader after three of ten events in the Chase for the Sprint Cup.

Kevin Harvick managed the third position in the closing laps of the race, after starting twenty-fourth on the grid. Pole position winner Kasey Kahne collided with the wall earlier in the race, which prompted him to a thirty-seventh place finish.

Tony Stewart, from the Stewart Haas Racing team, clinched the fourth position, after leading the most laps with 76. Jeff Gordon followed Stewart in fifth, while Carl Edwards could only manage sixth.

Matt Kenseth, Paul Menard, Ryan Newman, and A. J. Allmendinger rounded out the top ten finishers in the race. Other drivers in the Chase, such as Denny Hamlin finished twelfth, and Kyle Busch finished in twenty-first.

Johnson now heads the Drivers’ championship with 5,503 points, eight points ahead of Denny Hamlin. Manufacturers’ ?hampionship standings is lead by Chevrolet with 212, thirty-seven points ahead of Toyota and 77 ahead of Ford. Once the race concluded, Johnson commented, “I know we came [into Kansas] second. Of course, I wanted to be leading. I could care less where the 11 [Hamlin] was [Sunday]. It’s just not time to worry about that stuff. After Talladega, teams and drivers can work on a strategy of protecting or taking chances. We have to get deeper into the Chase to be concerned about who the points leader is.”

« Older posts Newer posts »

© 2026 maagoogle.com

Theme by Anders Noren — Up ↑